More Eco-Printing and Oak Tree Trivia

After the first try at eco-printing I wanted to do it again. I also wanted to investigate the technique a little more. As I read blog after blog by people who are eco-printing I got thinking that, as in much of the "fiber arts" there are few rules, some guidelines, and a lot of trial and error. You have to sift the known facts from all the other information that has probably just been passed from person to person. "We do it this way because...that's just how you do it." I always think of the story of the housewife (sorry, an old story) who cut the rear end off the turkey before she put it in the oven. Someone asked her why and that was the way her mother did it. It turns out that her mother did it because the only roasting pan wasn't big enough to hold the turkey. I digress... Eco-printing, 2nd try:

I had a plan. I wanted to try as many different trees and bushes from our property as I could and print them all on one piece of fabric and use it for a curtain in front of the open closet in my newly painted office. I bought four yards of cotton fabric and cut it in half. I scoured both pieces and then mordanted one in alum. More internet perusal. I read many instructions about mordanting cotton and it seems that the most recommended mordant is aluminum acetate.  I had aluminum potassium sulfate so that's what I used. You're supposed to follow it up with calcium carbonate or wheat bran. I threw in some CaC03 just in case.

Some friends were here to experiment also. I found that I was running around gathering stuff, trying to figure out how to print on a 45" wide piece of fabric when the maximum pan size would allow 16",  etc.  and I didn't get any photos of the process.Before you print with plants you soak the mordanted (or not) fabric in iron or tannin (or not). Then you apply the plant material (possibly dipped in iron or not). You cover it with a "blanket" of cotton fabric and then roll the whole thing up with plastic  on a dowel or in my case,  2" PVC pipe and tie it tightly. Then you steam for 90 minutes. Why 90 minutes? That's just because that is how long everyone else says to do it. I started with a map because I wanted my two fabrics to have the same plants in the same positions. I started with the top row of this map and covered it with the blanket material and plastic. Then I placed more blanket material (old cotton sheets), placed the plants on that (upside down from how I wanted them to appear) and folded over the middle third of the fabric. I placed more plastic to separate the middle and outer third layers and applied more plants. At this point I started to think of other plants I wanted to add so some of these were thrown on in between the others or tucked into the middle layer. The photo above the map is the second piece of fabric with part of it's blanket fabrics, which by this time were any scraps that I could make work. You can see in the blanket fabric on the left the mirror image that was created. Here are the two fabrics I printed. Both were dipped in the iron solution before using them. The one on the left was the first one that I did. I think it looks a little less messy because I took more time with it. By the time I got to the second one  everyone else was taking theirs out of the steamer and I wanted to hurry...and add more plants that I thought of. Differences: The one on the left was not mordanted and the one on the right was. I don't know that it made any difference at all in how the plant material reacted with the fabric. Both were dipped in iron. Reasons for the difference? The first project (on the left) took me a lot longer because I was running around finding things like matches and hot pads, cutting PVC pipe, etc. I could see the fabric darkening as it sat out. By the time I got to the second one the iron bath had been mixed longer and I hear that the effectiveness is quickly reduced after it has been mixed. So was it the time the iron bath had been mixed? The time between dipping and steaming? The alum mordant on the right?Maple leaves. When you see the spots that look like bulbs--those are the tannins leaking out of the stems in plant material with plenty of tannin. (At least that's he explanation I've heard.)Oak branch.

I decided to do one more. One person had brought silk scarves for people to use.I dipped the silk (right) in tannin and the blanket material (large piece of cotton that I didn't cut and instead just folded over) in iron. I used three plants on the silk.We were loving the effect of the sheoak (Casuarina sp) on some of the other pieces. That's that wispy one that you see better on the silk. I had added Chinese pistache and oak leaves. Wow. Way too much tannin effect. The outline of the pistache on the blanket fabric is pretty but it doesn't look so good on the silk. Note to self--use one leaf, not a branch, and maybe even that would be too much. I lost the definition in the oak leaves as well.Here are those three plant materials after dyeing.Another view of the oak leaf and the Chinese pistache.I went out back to photograph the trees. Oak on the left with a palm in front of it. The sheoak is the tall feathery looking one and the smaller tree turning yellow is the pistache.I brought some of the oak leaves in to check ID because I wasn't sure which oak this was (Valley Oak). Look at what a community of other things is on the underside of the leaf. There are two different spiders there as well as......these growths that were described appropriately enough on-line as "miniature chocolate kisses covered with red foil". These are the response of the tree to the Red cone gall wasp, a tiny (fruit-fly size) wasp that "lays her eggs inside the leaves of the host tree. They hatch and start eating the leaf, which causes the plant to form a hard structure in order to wall off the irritant. This gall is just what the insect needs, though: more plant tissues to eat. The larva pupates and develops into an adult wasp before it emerges." This oak has plenty of the big round oak galls too. I think that I may have to take some photos and write another post about the dozens of things living in this tree.

Hiking at Stebbins Cold Canyon

Stebbins Cold Canyon Reserve is managed by the University of California. The website says: "The UC Davis Stebbins Cold Canyon Reserve is set in a steep inland canyon of the California Coast Range. Extreme topography gives the reserve a mix of habitats, high species diversity, and beautiful views.  An intense wildfire burned the entire reserve in summer of 2015; University of California researchers are studying the recovery in the area."  The canyon is only about 25 minutes away and we try to go hiking there a couple times a year. Here are photos of a hike there during the spring when everything is green. This time of year it is dry and hot. In fact whoever is in charge is doing their best to warn us away from this hike.Falling trees, high heat, fires, snakes, poison oak, ticks, mountain lions, high water (that would be a different season). Maybe we should just go back home to the couch. After the 2015 fire the area was rebuilt to accommodate needed parking. Now we park below the Reserve instead of on the side of the road and walk under the road through these huge culverts. This is also where storm water will go in the winter. What's with the graffiti? I am not a fan.Leaving the culvert.We headed out on the Blue Ridge trail, a five mile round trip. This is three years after the fire. That bush on the right is a CA Bay Laurel growing from the base of the burned tree (it can take on the form of a bush or tree).

Our first hazard, poison oak.Maybe the next time I go hiking here I'll count the steps. The trail starts in the canyon and eventually you have to get to the top of the ridge. There may be a million stairs--at least it seems that way when you are half way up. Taking scenic photos is a good excuse to stop. This is a panorama looking southeast. Our trail continued to the ridgeline. This is the bluest sky that I've seen since the fires started in June. We're up above the smoke and haze here.

View to the east. That little line on the ridge is our trail.

From the top you can look down to Lake Berryessa. Except for the foreground most of the land was burned this summer.

More of the trail. Keep walking.California Cudweed.Toyon berries.Burned oak.Fall colors (more poison oak).

Eco-Printing

I've been dyeing with plants that grow on the farm, but the other day I learned about Eco Printing and now I'll look at all these plants in a new way. A few friends and I went to Lafayette for a lesson.Here are some examples from the friend who showed us how to do this.We went out to the backyard to get started. There was a supervisor already on duty to make sure that we didn't mix up the buckets. One says Iron Sulphate and the other says Tannin.We dipped our fabric in one or the other depending on if it was silk or cotton and then laid it out on the table.I brought weeping willow fronds, oak and eucalyptus leaves, and zinnia and dahlia flowers. I started with silk dipped in tannin solution and then covered this with cotton soaked in the iron solutionAfter rolling everything up and tying it snugly the fabric rolls were steamed for an hour and a half.While the first batch was steaming we all worked on another project. We were limited by the pot size to a 12" roll. To print a wider fabric it needed to be folded. So that's what I did with this one. This piece is 36" wide. I laid leaves on the center strip and folded one side over. The design would be symmetrical on those two panels. Then I spread plastic on that fabric and placed leaves on the plastic to be printed on the third layer to be folded over. Here are the first ones being unveiled.The plant material leaves an outline as it resists the iron on the cotton layer that was applied to it. The iron turns the silk varying shades depending on the strength and freshness of the iron solution.Interestingly the cotton "blanket" that was rolled up with the silk is sometimes just as appealing as the silk piece.This is a cotton pillowcase in which the design is not from a resist but from the plant material itself.Here is the project that I did first. I like the printed cotton as much as I do the silk. The willow is the most striking feature. The color spots at the bottom and top are from the flower heads.

The purple blotch at the base of the leaves on the right is a result of the amount of tannin in those leaves. It leaks out during this process. One way to deal with that is to put the stems to the edge of the fabric.

Here is the larger piece that I did. You can see the symmetry of the folded cloth on the right. The third layer has a different look. I think those splotchy parts has something to do with the plant material being rolled right onto the plastic. The tannin "leakage" from the oak leaves is also apparent on this piece.The pieces on the right were a silk scarf that started out a rusty red and the mirror image is the blanket cloth for that scarf. Both are beautiful.I went there planning to make some wool samples. However I had not mordanted my wool so I decided to save most of it. This piece was dipped in iron (left side) and tannin (right side) and the middle was not treated. I laid out black walnut leaves and did the steaming later at home.This is the finished sample. Next step will be to wash all of these and see how they hold up. I'm excited to do more of this for sure. ... Like I need another thing to distract me right now.

Zinnias

Not too many words here. Just pretty flowers. Look at all that detail. Aren't they amazing?

Rams

I selected three ram lambs to keep--not that I need all three, but these are the ones that I have selected to see how they turn out as they get bigger.   With Jacob sheep it's frustrating because you may have a ram with nice fleece and good conformation but, if the horns don't grow correctly, he can't be registered. With two horn rams it is important to select a lamb with horns that are growing away from the head.  With a four horn ram there needs to be space between the upper and lower, but not too much, and the lower horns should not grow into the jaw, or the neck. Too much to ask? It seems like it. I had a lot of nice two horn lambs this year, but not so many four horn ones. I sold some nice ones and some of the ones I was keeping my eye on have finally been culled due to horns fusing. There are a few left on the website. I moved the three lambs into the big ram pen figuring that they would not be old enough to get into trouble with the adult rams. It's true that the young rams didn't confront the older ones but there was a lot of chasing on the part of the adults.

The three big rams come to see what's going on.The 2-year old 4-horn is Buster and the yearling 2-horn next to him is Cayenne.  The lambs aren't named yet but this one is a full brother to the yearling ram that I took to Maryland this spring and who now lives in Pennsylvania.Since the young rams can't find the older rams they will fight among themselves. That two horn lamb is a full brother to Cayenne in the photos above.

 Buster again and that two horn yearling is Gotham (for sale, by the way). Gotham chasing the lambs.This is the other two-horn lamb that I'm keeping for now.Gotham in pursuit.This young guy has got moves!

State Fair

The CA State Fair was at the end of July but I was too busy with back-to-back events to post about it. Now we'll go back in time to the fair. Of course, entering the fair is about showing sheep. But for me an important element is the display and the Marketing Award. A lot of effort goes into that from me and from Farm Club members. We've been using the old tin backdrop for a long time and I still really like the look. It worked especially well with the natural dye display we made this year. There are also signs about Farm Club, examples of yarn and wool on the table, and a continuous loop of about 45 minutes of my farm videos. The Touching Table is popular with fair-goers.There are more signs over the sheep pens. My potted plants were dug out of the pasture and include a sign about what is in the bucket.

There is always someone demonstrating at the booth. I was glad that I brought my loom this year. It drew a lot of interest and I wove six scarves while I was there.

Speaking of weaving, this is Lucien, who was with the Eureka! Mohair Farm across the aisle from us. He was interested in weaving so I brought the Cricket loom for him to use. I forgot the warping peg, but notice that we found something to use instead. By the next day Lucien had woven off this scarf using a clasped weft technique for his first piece! Yarns in his scarf and mine are locally grown Anderson Ranch yarn and my handspun.

Here is closeup of some of the yarns on display. Farm Club member, Lisa, dyed most of these. One of the kids' activities we provide is this sheet for drawing in details on the sheep. Not everyone takes them home.We are also here for the sheep show. Fortunately Jacob sheep don't require a lot of fitting, but it is nice to get them cleaned up a bit.The horns looked pretty good after a scrubbing. This is a ram lamb named Axle.This is Jana on the right and a less-glad-to-be-there Halcyon. The Primitive Breeds show was Saturday afternoon. This is a yearling ram, Meridian Gotham. (Look at those shiny horns.)Unfortunately there was very little competition this year and I had the only rams. So it's nice to get a Champion award, but it would have been nice to have other breeders' sheep there. Marina and Betsy helped show. This is the ram lamb class.Meridian Maybelline was awarded Champion Ewe.Thanks so much to Betsy and Marina for pitching in and showing sheep. And thanks to Dona for the photos. Here we are with a pile of awards, including Premier Breeder and Premier Sire.

Winning Champion, even with little competition, means that you take your sheep into the ring on Sunday for the Supreme Champion competition. No, Gotham didn't shrunk overnight. He was the same size as always. It's just that those Suffolks are like ponies. This is the Supreme Champion Ewe competition. In between the Supreme Champion Ram and Supreme Champion Ewe competitions they announce the Marketing Award winners. We did pretty well! Best Marketing Program. Best Program Directed at the Public. Best Signage. 1st place Herdsman. 1st Place Educational Program. 2nd Place Educational Program over all the livestock species during the three weeks of the fair. Can't ask for more than that!

But there is more! Loading up in my new trailer! Oregon here we come in 2019!

JSBA AGM - Part 2

After all the planning and anticipation that went into the AGM it was just so short--Friday afternoon to Sunday morning. I shared some Friday photos here. One of these days when I find Dona's flashdrive in all the clutter around here (a remodel project going on) I'll share hers because I think she has some great ones. For now I'll share the ones that I took Saturday.People arrived for breakfast before the day's program started.First up was "Pass or Fail" a talk presented by Royal and me, the two JSBA inspectors who were present. We started by looking at slides......and then went outside to look at sheep. I hadn't sold any of my cull rams yet so that we'd have plenty of examples of potential horn problems.  We also looked at some of the other sheep present.

Next up was Dave Pratt, who owns Ranch Management Consultants and teaches Ranching for Profit schools (described as a business school for ranchers) all over the country (and happens to be my brother). We started with his charts and slides and then moved to the pasture to finish up.Jade is always willing to greet a visitor to the farm.Dr. Joan Rowe from UC Davis talked about Lambing and Sheep Obstetrics. Helpful hint: Another use for a feeding tube and syringe is to get lube around a lamb when you need to reach in to rearrange or pull it.

This was all before lunch.Afterwards Susan Gandy, one of the Farm Club members, demonstrated preparation and analysis of fecal samples using a method that can be used on the farm to stay on top of parasite levels in our sheep.

By the way, if you're wondering about the background in these photos, we used G-1 (the garage) for PowerPoint presentations because that was the place that was the most dark, the best for viewing slides.

Martin Dally's talk was next. Martin is well-known as a wool and sheep judge and for his business, Super Sires, Ltd. and we were lucky that he consented to come from Oregon to talk with us. He presented two topics relating to wool--biology and development of wool and the effects of genetics on wool characteristics.

Showing these photos and writing a few paragraphs doesn't begin to get across the depth of information that was presented in these talks. You should also know that the afternoon temperature was in the high 90's and the skies had been smoke-filled for days due to the wildfires burning in California. By the time Martin's presentations were over at 3:45 I was on information overload. But we weren't finished yet! AGM stands for Annual General Meeting and that is a required element of our gathering. So it was meeting time. Gary Anderson from Michigan led the meeting and brought people up to date on JSBA goings-on, recognition of individuals, and announcements. I was given a much appreciated gift card to my favorite local store, Higby's Country Feed!Royal and others presented reports...

...while members and friends listened. It was late on a hot afternoon and we still had one more topic scheduled. I had planned a Breeders' Roundtable where selected members from around the country would offer their expertise on various management topics. At this point I wondered if it was just too much and if people would rather not focus on another presentation. I was actually glad when one of the attendees said that she spent a lot of money to get here and wanted all the info she could get. All right--let's do it! However, I didn't orchestrate it as much as I had the other talks--I was tired of being the time-keeper and making sure people were where they were supposed to be. This was informal but very informative and friendly as we sat in the tent and talked about a variety of Jacob sheep topics. Did I share the things to look at in the tent? Dona put together a display of the unshorn Pope Valley sheep that we recently acquired.Having just finished the State Fair the week before we put up part of our Marketing (award winning by the way) display.A couple of people had farm displays and sales.  And there were sheep to buy.I find that my photos kind of stopped here at dinner. (But I will still find Dona's eventually.) After dinner we held the annual raffle and I don't have photos of that. There were fantastic prizes and we are grateful to everyone who provided them (you can see them here).

Sunday morning people met back here for breakfast and I caught some sheep so we could talk about condition scoring and how that applies to our Jacob flocks.  Then is was time for most people to wrap things up and leave.I enjoyed have Karen and Doug from Oregon here all weekend as Dan got a chance to meet them and spend some evening hours together. This is Karen's new look!It was over all too soon. The tent was taken down, everything put away and we're back to normal. Or is it ever normal? Two days after this event and the months of getting the place fixed up Dan said something like "maybe we should work on the house now." That will be another story.

JSBA AGM

I wrote blog posts about getting ready for AGM but was overwhelmed with too many photos to sort (and other parts of life) to do more until now.                The handwoven Jacob wool goodie bags were ready, filled with locally made or grown products.The friendly parking attendant was ready. Sheep were given last minute instructions about behavior. (Karen Lobb from bide a wee Farm in Oregon)Guest were arriving.Our first gathering was a welcome by me and then a talk/book reading by Farm Club member Stephany Wilkes.  She read passages from her book, Raw Material, Working Wool in the West, to be published in October. This introduced the attendees to the concept of Fibershed and to Farm Club all at once.Next it was time for dinner. Farm Club member, Kim, provided background music throughout dinner and we were told how much people enjoyed listening to her.

The after-dinner entertainment was Project Runway, Jacob Style where we modeled garments made of Jacob wool.Most participants led sheep (some willing and some not so much) down the barn aisle... ...but Dona led Rick......willingly?

 Doris was the recipient of the People's Choice award.

This was only the start to a full weekend of sheepy fun!

Getting Ready for AGM - Part 2

The day after the tent was set up  (photos in this post) Farm Club members returned for more work.                  Tables were set up and arranged.              Trish borrowed sheep panels and we combined those with some I had to make pens.

               The barn was ready for Project Runway.

On Monday I had made a final decision about which ram lambs to keep. I wanted to separate those from the lambs that were for sale. FC member Doris was here then and as we were leading them to the big ram pen I diverted them to the barn. I figured that I should use the 4 days before AGM to get them halter broken. If I turned them out in the ram pen without doing at least a little of that then I may never get to it.

So in between doing the other work we had been working with these rams. On Thursday we put them in with the big rams. There was a bit of drama while the big rams chased them around, but eventually they all settled down.                Mary and Dona stuffed the goodie bags that were to be given to the registrants. FC member, Kathleen wove 30 bags using Jacob wool and we had gathered locally produced items to put in them.

                                                 The special items included cooling neckties made by Mary using sheep-themed fabric. I can attest to how good these feel when it's 100 degrees out.                       After another day of work we were ready for Friday when we'd be putting up displays and raffle items and greeting the registrants.

Getting Ready for AGM

I just looked back to see where I left off in my blog. Wow! July 16 when we were shearing the Pope Valley Sheep. So much has happened since then but I've been way too busy to sort photos and share them. State Fair was a big one and there are sheep stories to write, but now that the major deadlines have come and gone I'll be working backwards in these events. Getting ready for JSBA AGM. (What's AGM? Jacob Sheep Breeders Annual General Meeting, which, about a year ago, I offered to host.) The preparation really started long ago. Farm Club and a few others were on the committee and we met monthly. Around here we started thinking about everything we could do to spruce up the place. Painting the barn led to fixing the barn, etc. But those are photos for another post.

AGM was Friday through Sunday, August 3-5. On Wednesday the 30 x 40 foot tent was delivered.

While the tent guys were working a flurry of other activity was going on.

              Mary and Russ organized Project Runway, Jacob Style, our Friday evening entertainment, to be held in the barn.                  There was strategy involved in figuring out how to arrange lighting behind the drape for the desired effect.

Lights were hung.

                     The extra porta-potty arrived.                  Dan scraped behind the barn to create more space for parking.

                    Then he mowed the most recently grazed pasture. Note hat that matches tractor. That was a belated Father's Day gift from Chris. It includes the MJ logo on top.                  He also trimmed branches in the front so people could see our sign.                 Here is the tent all set up. Note to self--when measuring for a tent remember to look up and not just measure the ground.

Summer Shearing - Part 2

Shearing Day  for the 12 sheep Dona and I acquired was last Thursday. Here is another blog post with photos from that day.

Sorry. I'm not saying much about these photos. It's been a long hot day and I am falling asleep a the computer.  They really don't need an explanation.!

Summer Shearing

I've written two blog posts about acquiring 12 Jacob sheep in what became something of a rescue operation. The sheep were healthy and well-fed, but had not been shorn for three years we think. This was shearing day for these sheep. The photos in this blog post were all taken by Farm Club members, Dona and Gynna. Thanks!!

                 John is the Rock Star.

                                                 We checked teeth to try and figure out the ages of the sheep.                   This sheep had a 13 pound fleece. The average for Jacob sheep is 3-6 pounds.                   It was a multi-person operation to stuff some of these fleeces into plastic bags.              The usual suspects were there to watch and cheer John on.                            Not a bad looking group of ewes after shearing.                            The two rams.                       After shearing we looked at all the fleeces. The longer fleeces have a break about 4" in from the outside, but the rest of the fleece seems sound.                                                                  It will take some time to work through it all.

                                                                As we pulled out staples from some of the fleeces I thought it would be a good idea to get a photo. Susan and Gynna worked on this while we opened up and re-rolled the fleeces.                       Note the measurements marked on the sides and down the middles. Weights are below.                                                   This was a fun day for all of us and a good day for these sheep.

Sheep Adventure Follow-up

Monday's  Sheep Adventure started because someone had asked for help in selling Jacob sheep that his parents couldn't take care of. I didn't consider it a rescue operation although I didn't know this person and I don't need anymore sheep, at least sheep of unknown background, and I didn't really have a plan for what to do with them other than try to sell them. When he called again last week things were a bit more desperate because his mom was in the hospital and the family had no clue of what to do with the sheep...other than to get someone else to deal with them. That's when I said I'd get them. Dona and Rick were up for the adventure but we didn't know what to expect. What we found: Sheep that really are Jacob sheep--there are a lot out there that people think are Jacob because of horns or spots, but they are not; Sheep in relatively good health EXCEPT for in desperate need of shearing. So the Sheep Adventure turned into a Sheep Rescue of sorts.

Yesterday I took time to look at each sheep more closely. Now that I'm spending time with them, the group is kind of growing on me. "I don't need more sheep. I don't need more sheep. I don't need more sheep...."                  This is a ewe they called Athena.                                                      I think that this is at least a 3-year fleece.                   I love the markings on this ewe's body. I don't have any information about her.                 This is a ewe they called Caliope. She is pretty wild.

A ewe called Dimitria. The wool is very pretty, but its as long as my elbow to my thumb.

                Markela, one of the original ewes purchased by this family.                    No idea about this ewe...                 ...or this one. Don't you love her horns?              Paniota...

            ...and her fleece.                 The lamb named Easter because that is when she was born.                New temporary quarters.            Stay tuned for a Shearing Day post.              Let's not forget the rams. Tikes on the left and Costa on the right. I think they are yearlings.

Another Sheep Adventure

This Sheep Adventure started the night before with hooking up the trailer, gathering halters and panels,  and checking to see which roads would be closed due to the fire burning in the general vicinity of where we were headed. Someone named Michael in Idaho had called me a couple of months ago asking if I could help him sell Jacob sheep that were at his parents' place in Napa County. It seems his sister and father got some sheep a few years ago but Michael thought that they had lost interest or there were health issues or for whatever reason the sheep weren't getting the attention that they needed. I didn't hear from him again until a few days ago when he said that his mother was in the hospital and the sheep needed to go.

Dona and Rick got here about 7 and we took off. I drove my truck with the trailer and Rick drove his truck with a sheep crate in the back.

                                                      I brought Ginny because Michael had thought that we might need a dog to catch the sheep. I had my doubts that we could do much with sheep that had never been worked by a dog and were possibly wild but it was a good excuse to bring Ginny along. She is not a big fan of car rides.

The map on the phone showed it would take about 1 hour 50 minutes to get to where we were going near Pope Valley.  What with unclear directions and road signs (and maybe a bit of distraction as Dona and I talked the whole time) I had to turn around and back up the trailer in the middle of the road three times before we got to where we were going.

We were met by Michael's brother who evidently is the person who has been feeding the sheep. He told us that their mother had just died a few hours ago but he'd help us get the sheep rounded up.

               He said that he would be able to get them in the fenced in area with some grain, so we stayed out of sight while he enticed the sheep into the pen.               This is nine ewes and one ewe lamb. Two rams were up the hill in another area.                    If you know anything about sheep you'll see that this ewe is way overdue for shearing.                All but one were in this condition. I wonder if the ewe in full, but not horribly excessive fleece (in the back in this photo) might have had a fleece break a year or more ago, lost that fleece and now has only a year's growth.

             We didn't get photos of the process but we set up our panels to help catch the sheep. We put halters on the ewes two at a time and brought them to the trailer. Next we got the rams.  It was a tight fit for those nine adult ewes with as much fleece as probably should have been on 25 sheep.           The rams weren't much better.

The drive home went better as far as not missing turns and having to turn around.                           However we did have another mishap.                                      The first clue I had was the thump/thwack that I heard. Fortunately I was able to pull over in a wide driveway on this windy road (Hwy. 121) and the weather was relatively mild with a breeze because those sheep were really packed in. Fortunately Rick was there because he had the right tools in his truck -- I never did find the lug wrench in mine (although now that I think about it, maybe it was under the hood). Fortunately Rick was there to get the lug nuts off because with as much trouble as he had with the last one I'm pretty sure I wouldn't have been able to do it. I had made sure before we left that yes, I had paid the AAA membership that was due...but there was no cell service here. Rick replaced the tire with the spare and we lowered the jack. That tire was too low to drive on so Rick jacked up the trailer again, took the tire off, and left in his truck to find somewhere to fill it up. I think he was gone almost an hour before he came back with a fully inflated tire--he had found a group of fire trucks and been able to get the tire filled by the crew.

The original plan was to take these sheep to Dona and Rick's place in Wilton where there were empty pastures waiting. But with no spare for the trailer (and the other tire looking in not very good shape) I didn't want to drive an extra 2 hours on the freeway in rush hour traffic and 100 degree heat. So we unloaded at my place.After getting our hands on these sheep I think that they are in surprisingly good health. They seem to be in decent condition under all that wool and from their teeth I think that they are all four years or under.  There are two with ear tags that indicate a friend's flock. Those two are docked. None of the others are docked and I think that all of those descended from those two and maybe another that I was told had died. I don't think that any of those born at this place have ever been shorn. So that's our first order of business--to find a shearer. Then Dona and I will figure out the next steps.

Grandkids Across the Road

While the grandkids were still here we made an excursion Across the Road. I hadn't wanted to take three dogs and the two kids on my own because of the part where we have to walk on Meridian Road. There isn't a lot of traffic but the cars are fast and there isn't much of a shoulder to walk on. I didn't want to pull the wagon where Kason was riding and hang onto three leashes, all the while trying to get the dogs off the pavement when cars came. (The dogs want to stay on the pavement because they have learned that when they walk off the pavement they are apt to pick up puncture vine burrs in their feet.) By the way, Rusty shared some photos of this in his blog.              The wagon worked well for Kasen and had the added benefit of taking all the necessary things like water bottles and the doll.

            Meryl and I traded off with the wagon, but part of the point of this walk was for Kirby, wearing her black and pink Nikes, to run with Aunt Meryl.

 Eventually Aunt Meryl tired and needed a ride.                 Time to go home. Kirby started to pout because she wanted Sawyer's leash.                  I let her take Rusty and all was OK.

Lambs growing up

I just submitted registration applications for another eight lambs. I can't keep them all but hope that I'll be able to sell some at the JSBA AGM that we will be hosting in a month.                      Meridian Sharon (Meridian Catalyst x Shadow Mountain Shelby).           Meridian Ruthie (Meridian Cayenne x Meridian Ruth       Meridian Soprano (bide a wee Buster x Meridian Sonata).         Meridian Fauna (Meridian Catalyst x Mud Ranch's Foxglove)

           Here is Meridian Sharon on the left and Meridian Shirley on the right. (Meridian Catalyst x Shadow Mountain Shelby)

Sheep Portraits

I've been updating the Sheep for Sale part of the website. Here are some sheep photos.                 This is the yearling ram, Cayenne. He is not for sale.              Yearling ram, Gotham, is for sale.                Ewe lamb (Meridian Catalyst x Shadow Mountain Shelby).                   Ewe lamb (Meridian Catalyst x Meridian Delight).            Ewe lamb (bide a wee Buster x bide a wee Hallie).                 Ram lamb (Meridian Catalyst x Meridian Ava).                  Six-horn ewe lamb not for sale (bide a wee Buster x Meridian Jade).              Four-horn ewe lamb, Janna, not for sale (bide a wee Buster x Meridian Janis)                   Oops! For sale, but not for breeding. Ugly-horned ram lamb. If you're interested in lambs for meat see this link.

Grandkids and the Gravel Pile

          What better place to entertain an 18-month old than a gravel pile with tractors?                     These trucks and tractors have been in the garage for 25+ years             Hose off the spiders and they're as good as new.                 Watching kids can be exhausting. Notice what Ginny is looking at--that's her ball right next to Dan.           Kasen found the ball-thrower.              That kept Ginny entertained even though Kasen wasn't able to throw the ball very well.                   See Rusty's blog for more photos.

Fun at Home Depot

On every first Saturday Home Depot has a Kids' Workshop and Katie has been taking Kirby to the workshops in Texas. Dan was the designated adult for this one.                 The kids have aprons and they get badges for all the projects they complete.              This month's project was a wooden car. Dan started the nails for Kirby and she finished the pounding.                There are kids lined up all along the "tables" made of boards and buckets.                     Katie said that Kirby often likes the painting part more than the building part.                                                  Pink was not one of the colors that was offered but we all know what you get when you mix red and white.                                               Kirby was through enough to want to paint the bottom of the car too.                This activity goes on all morning. While we waited for the paint on Kirby's car to dry we walked around the garden part of the store and looked at flowers.                                                 Kirby came back for her badge.                                                 Then it was time to put the wheels and the stickers on the car.                        Project finished!

More Fun in the Barn

I hope you're not tired of grandkid photos yet. The last ones were here.                  While Katie was still working on the barn during her visit...                                                                ...I supervised Kirby...                                                           ...and Kasen.                     I think that Uncle Chris was a lot more fun than me.

                Notice the dog ball in Kirby's left hand and two dogs waiting for it.                 Back to the wagon.                    On this day I didn't need to put the carseat in it for Kasen to fall asleep. 

                Someone else was worn out too.